The Hawk family of non-contact measurement solutions is modular and flexible. A range of system configuration options are available to exactly suit your application requirements. The example applications below provide a guide as to how to tailor a Hawk system for your application. Please contact Vision Engineering for further assistance.

Application Characteristics:
Reflective material, intricate machining, high accuracy

Measurement Requirements:
Measurement of 5mm external diameters
(required tolerance of 2µm)
Measurement of 0.5mm external shoulder
Diameters; radii; angular measurement
Inspection of surface detail
Image capture for archiving
Measurement data recording and manipulation

Hawk Configuration:
Hawk 3-axis fully automated non-contact
measurement system
x2 and x5 objective lens magnification
(total magnification x20 and x50 respectively)
Dual spot lamp illumination
(sub-stage illumination standard)
QC5000 3D Metrology Software

Specification Details: (Hawk 3-osiowy automated system)

QC5000 3D Metrology Software and video camera allow for fully automated measurement, with lighting control and motorized stage movement. Fully automated measurement allows for hands-off measurement and high sample throughput. 200mm x 150mm high accuracy stage provides stage accuracy better than 2µm. x20 magnification used for diameter and radii measurement. x50 magnification used for accurate measurement in the Z-axis. Dual spot lamp illumination used for highly reflective subject. Video camera attachment also allows for image capture with archiving software. QC5000 3D Metrology Software provides all the required geometric functions, statistical reporting, part programming and automated control.

Application Characteristics:
Black, highly light absorbent, low contrast

Measurement Requirements:
Measurement over a 150mm x 100mm area
Measurement of 3mm diameter blind bores
(required tolerance of 2µm)
Measurement of 0.1mm bore depth
Measurement of internal moulded bosses
Diameters; radii; angular measurement
Inspection of surface detail
Measurement data recording and manipulation

Hawk Configuration:
Hawk 3-axis fully automated non-contact
measurement system
200 x 150mm high accuracy motorized stage
Video camera with full VED (Video Edge Detection)
capability
x2 and x5 objective lens magnification
(total magnification x20 and x50 respectively)
6-point ring light and epi-illumination
(sub-stage illumination standard)
QC5000 3D Metrology Software

Specification Details: (Hawk 3-osiowy automated system)

QC5000 3D Metrology Software and video camera allow for fully automated measurement, with lighting control and motorized stage movement. Fully automated measurement allows for hands-off measurement and high sample throughput. 200mm x 150mm high accuracy stage provides stage accuracy better than 2µm. x20 magnification used for diameter and radii measurement. x50 magnification used for measuring 3mm blind bore giving high magnification within the field of view and a depth of focus of 4µm. 4µm depth of focus allow for accurate automated measurement in the Z-axis. Through the lens epi-illumination is used to illuminate the internal bore, while substage illumination is used for profile measurement. QC5000 3D Metrology Software provides all the required geometric functions, statistical reporting, part programming and automated control.